{"product_id":"sos-cleanroom-texwipe-tx7026-alphasat-8-x-15-replacement-mop-covers-pre-wetted-6-ipa-refills-case-qty-case","title":"SOS Cleanroom Texwipe TX7026 AlphaSat 8\" x 15\" Replacement Mop Covers Pre-Wetted 6% IPA (Refills) (Case Qty.) - Case","description":"\u003cdiv style=\"margin: 0 0 10px 0;\"\u003e\n\u003cdiv style=\"font-weight: bold; font-size: 20px; margin: 0 0 6px 0;\"\u003e\u003cspan style=\"font-size: 18pt;\"\u003eTexwipe TX7026 AlphaSat® Pre-Wetted Replacement Mop Covers — 8\" x 15\", 6% IPA \/ 94% DIW (Refills)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"margin: 0;\"\u003eTX7026 is a pre-wetted replacement mop cover set built for critical-environment floor, wall, and ceiling cleaning where you need a controlled liquid load and a low particle-generating polyester substrate. These AlphaSat® covers use Texwipe’s AlphaWipe® continuous-filament knitted polyester and arrive pre-wetted with a 0.2 µm filtered, semiconductor-grade 6% isopropyl alcohol (IPA) \/ 94% deionized water solution to help reduce mixing errors, cut VOC burden versus open buckets, and support repeatable surface wetting in production cleaning. \u003cbr\u003e\u003cbr\u003eFor over 35 years, SOS and Texwipe have been close partners, and SOSCleanroom is the authorized Master Distributor of ITW Texwipe for the United States market. That relationship matters when you are standardizing mopping systems: it supports continuity of supply, stable product lineage, and fast access to the manufacturer documentation your QA\/QC team expects.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr style=\"border: 0; border-top: 1px solid #0b5aa2; margin: 12px 0;\"\u003e\n\u003cdiv style=\"font-weight: bold; font-size: 18px; margin: 0 0 8px 0;\"\u003ePublished configuration (TX7026)\u003c\/div\u003e\n\u003cul style=\"margin: 0 0 12px 18px; padding: 0;\"\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eCover size:\u003c\/strong\u003e 8\" x 15\" (20 cm x 38 cm)\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eDry\/Pre-Wet:\u003c\/strong\u003e Pre-wet\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eSubstrate:\u003c\/strong\u003e AlphaWipe® continuous-filament knitted polyester (low-linting, low particle-generating by design)\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003ePre-wet solution:\u003c\/strong\u003e 6% IPA \/ 94% DIW (0.2 µm filtered; IPA described as semiconductor grade)\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003ePackaging (inner):\u003c\/strong\u003e 25 covers per bag with foam pad(s) included; recloseable pouch feature to help prevent solvent evaporation\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003ePackaging (case):\u003c\/strong\u003e Total 100 covers per case (4 bags of 25). Foam pads: listed as 4 pads\/case on current product listings; older DS-7026 sheet lists 2 pads\/case.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eCompatible systems:\u003c\/strong\u003e Replacement covers for Texwipe AlphaMop™ flat mop kits including TX7108 and TX7108A\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eCleanroom environment:\u003c\/strong\u003e Published as ISO Class 3–7 (also described as recommended for ISO Class 3 in some legacy documentation)\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eNon-sterile:\u003c\/strong\u003e Yes (sterile version not published for this part number)\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eHazmat shipping:\u003c\/strong\u003e Ground shipping only; commercial address only; hazmat surcharge required per case (as configured at checkout)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"background: #eaf3ff; border: 1px solid #0b5aa2; border-radius: 8px; padding: 12px; margin: 12px 0;\"\u003e\n\u003cdiv style=\"font-weight: bold; margin: 0 0 6px 0;\"\u003eLow-linting, low particle-generating — and the reality check\u003c\/div\u003e\n\u003cdiv style=\"margin: 0;\"\u003eThese covers are engineered for low particle generation and low extractables in critical cleaning. Even so, no textile system is truly “lint-free.” Treat mop covers as contamination-controlled components: control pouch wipe-down, glove discipline, change frequency, and the dry-time\/evaporation window so the cleaning process stays repeatable shift to shift.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr style=\"border: 0; border-top: 1px solid #0b5aa2; margin: 12px 0;\"\u003e\n\u003cdiv style=\"font-weight: bold; font-size: 18px; margin: 0 0 8px 0;\"\u003ePractical cleanroom use guidance (technicians and engineers)\u003c\/div\u003e\n\u003cul style=\"margin: 0 0 12px 18px; padding: 0;\"\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003ePouch wipe-down before entry:\u003c\/strong\u003e Wipe the closed pouch per your site SOP (directional strokes; fresh wipe faces; do not re-deposit). Allow the pouch to dry before opening to reduce solvent transfer to gloves and work surfaces.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eControl the liquid load:\u003c\/strong\u003e TX7026 is pre-wetted to a measured dilution. Do not add extra IPA\/DI water in the pouch. Over-wetting increases streaking risk and can push solvent into seams, corners, and under equipment.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003ePad alignment matters:\u003c\/strong\u003e Install the foam pad flat and centered, then fit the cover with even tension. Wrinkles and pad drift create “pressure ridges” that leave streaks and miss microtexture.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eStroke discipline:\u003c\/strong\u003e Use overlapping strokes with consistent pressure (avoid “scrubbing”). For walls\/ceilings, work top-to-bottom and maintain a wet edge to avoid drying lines.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eChange frequency:\u003c\/strong\u003e Replace covers based on area cleaned, bioburden\/soil load, and your validation limits. In high-risk programs, change at every room transition or defined square-foot threshold.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eSegregate by chemical and zone:\u003c\/strong\u003e Dedicate covers to a single chemical family and room\/area where required. Cross-use is a common route for residue carryover and unintended chemical interaction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border: 0; border-top: 1px solid #0b5aa2; margin: 12px 0;\"\u003e\n\u003cdiv style=\"font-weight: bold; font-size: 18px; margin: 0 0 8px 0;\"\u003eCompatibility and wipe-down notes\u003c\/div\u003e\n\u003cul style=\"margin: 0 0 12px 18px; padding: 0;\"\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003ePre-wet chemistry:\u003c\/strong\u003e Published as 6% IPA \/ 94% DIW (0.2 µm filtered). This is intended to support controlled wetting for routine cleaning and solution application\/removal.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eEvaporation control:\u003c\/strong\u003e Reseal the pouch immediately after removing a cover. Leaving the pouch open drives concentration shift and dry-out, which changes cleaning behavior and can increase streaking.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eSurface compatibility:\u003c\/strong\u003e IPA\/DI water is commonly used on stainless, epoxy, vinyl, and many coated surfaces, but material tolerance is site-specific. If you have sensitive polymers or optical coatings, qualify under your conditions before standardizing.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eFlammability \/ EHS:\u003c\/strong\u003e IPA-containing products require compliant storage and ground-only shipping. Follow site controls for flammables, ventilation, ignition sources, and waste handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"border: 0; border-top: 1px solid #0b5aa2; margin: 12px 0;\"\u003e\n\u003cdiv style=\"font-weight: bold; font-size: 18px; margin: 0 0 8px 0;\"\u003eTypical performance characteristics \u003c\/div\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cul style=\"margin: 0 0 12px 18px; padding: 0;\"\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eStreaking \/ haze:\u003c\/strong\u003e Most often from uneven pad contact, wrinkled covers, or over-wetting. Prevent with flat pad installation, even tension, and controlled overlapping strokes.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eResidue carryover:\u003c\/strong\u003e Caused by running one cover too long, crossing zones, or picking up bench oils\/adhesives. Prevent with defined change frequency and zone\/chemical segregation.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eEvaporation dry-out:\u003c\/strong\u003e Leaving the pouch open shifts the liquid load and can increase drag and redeposition. Prevent with immediate reseal and minimizing time between removal and use.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eRe-deposition of captured soil:\u003c\/strong\u003e Excessive scrubbing or back-and-forth strokes re-release particles. Prevent with directional technique and cover changes before saturation.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 6px 0;\"\u003e\n\u003cstrong\u003eSafety \/ compliance misses:\u003c\/strong\u003e IPA-containing products require proper flammable handling and ground shipment controls. Prevent with EHS-compliant storage, labeling, and waste practices.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Specialty Optical Systems \/ SOS Cleanroom","offers":[{"title":"Default Title","offer_id":44378668269748,"sku":"kpi259-TX7026 CASE","price":579.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/8484\/3444\/files\/568__23173.1409339263.png?v=1788682186","url":"https:\/\/kpaulsupply.com\/products\/sos-cleanroom-texwipe-tx7026-alphasat-8-x-15-replacement-mop-covers-pre-wetted-6-ipa-refills-case-qty-case","provider":"KPaul Industrial","version":"1.0","type":"link"}