- 30-day returns
- Fast shipping
- Secure payments
- Over 300,000 products
brand:
VELCRO®
category:
Office Equipment & Supplies
country_of_origin:
MX
height:
1.5
length:
7.25
manufacturer:
Velcro Companies
mpn:
VEK90812
quantity_size:
1 PK
subcategory:
General Office Supplies
type:
Hook & Loop Fastener
upc:
75967908126
weight:
0.14
width:
3
Product Description
VELCRO® - VEK90812 Adhesive sticks to most rough surfaces such as brick, wood, concrete and more and requires time for adhesive to set before mating the hook and loop so you have time to reposition. Adhesive is also water-resistant. Extreme tape is designed for permanently placing items.
Additional Information
ManufacturerVelcro Companies
Manufacturer Part Number90812
Manufacturer Website Addresshttp://www.velcro.com
Brand NameVELCRO®
Product LineExtreme
Product NameExtreme Outdoor 4in x 1in Strips Titanium 10 ct
Packaged Quantity10 / Pack
Product TypeHook & Loop Fastener
Tape Width1"
Tape Length4"
Strength TypeAdhesive, Industrial Grade, Holding
Tape Strength15lb
Application/UsageBrick, Wood, Concrete, Outdoor, Rough Surface, Tools, Hanging, Storing, Mounting, Indoor, Wall, Home, Office, Garage, Car, Basement
FeaturesHeavy Duty, Strong, Peel & Stick
DurabilityWater Resistant, UV Resistant, Weather Resistant
Color FamilyGray
Product ColorTitanium
Product MaterialPolyester
Additional InformationShape:Strips, Care and Application:Instructions:Clean and dry surface before application, Peel tape from fastener and press firmly into place, Adhesive reaches maximum strength after 24 hours, Note: Recommended for temperatures between 0°F to 140°F. Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener. May not adhere well to certain types of brick - testing is recommended., Removal Instructions:Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun), Peel off the tape (Hook or Loop) the adhesive will remain on the substrate, Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball, Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments), Stick the ball on the adhesive which is on your substrate and pull it off, Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time, If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners, Weight Rating:1 lbs per square inch up to 15 lbs, Functional Temperature Range:0-140° F (-18-60° C)
RecycledNo
Assembly RequiredNo