Bosch 7738004960 Condensate Collector

- Collects condensate that forms in the flue path of compatible HVAC equipment.

- Captures moisture as combustion gases cool and routes it to a drain connection.

- Prevents water from pooling in the ductwork or draining back into the appliance.

- Molded as a single-piece 90 degree bend between two wide circular ports.

- Serves as both the direction change in the flue run and the low collection point.

- Keyed collars at each end twist onto mating pipe sections for a sealed joint.

- Separable connections allow removal for cleaning or routine service.

- Translucent wall allows visual confirmation that condensate is draining freely.

- Molded outer spigots accept standard tubing for trap and drain line connection.

- Includes galvanized steel mounting bracket, support straps, screws, and drain fittings.

- Alternate part number 7-738-004-960.

 

The Bosch 7738004960 Condensate Collector manages the moisture that forms in the flue path of compatible HVAC equipment, capturing condensate as combustion gases cool and channeling it out to a drain connection so water cannot pool in the ductwork or run back into the appliance. Its translucent one-piece body is molded as a full 90-degree bend between two wide circular ports, which allows the part to serve as both the direction change in the flue run and the low point where condensate naturally collects, while the keyed collars at each end twist onto the mating pipe sections to form a sealed joint that can still be separated for cleaning or service. The clear wall lets a technician confirm at a glance that condensate is draining rather than backing up, and the small spigots molded into the outer surface accept standard tubing so collected water can be tied into the trap and drain line. It ships with the galvanized steel mounting bracket, support straps, screws, and drain fittings required to hold the assembly in position during installation.