Bosch 8733961769 HVAC Main Control Board Assembly

- Replacement SP ICM UPM I 2.0 control module.

- Monitors high pressure control, low pressure control, freeze sensors, and condensate conditions.

- Interrupts the compressor contactor circuit and signals a fault before damage occurs.

- Seven configurable DIP switches with a settings chart printed on the module.

- Adjustable lockout count, reset source, alarm output mode, test mode, freeze trip thresholds, and pump logic.

- Male quick-connect terminal tabs labeled R, C, CC, HPC, Y, LPC, FREEZE 1, FREEZE 2, COND, GND, OUT, ALR/COM, and G_OUT.

- Dedicated plug connection for a refrigerant leak detector.

- Onboard POWER and STATUS LED indicators for fast troubleshooting.

- Preinstalled nylon standoff clips for drop-in cabinet mounting.

- Alternate part number 8-733-961-769.

The Bosch 8733961769 is a replacement SP ICM UPM I 2.0 control module that safeguards HVAC compressor operation by monitoring high and low pressure controls, freeze sensors, and condensate conditions, then interrupting the compressor contactor circuit and signaling a fault before damage occurs. Screen-printed terminal designations for R, C, CC, HPC, Y, LPC, FREEZE 1, FREEZE 2, COND, GND, OUT, ALR/COM, and G_OUT are laid out around the board edges on male quick-connect tabs, and a dedicated plug supports a refrigerant leak detector, while onboard POWER and STATUS indicators give immediate visual confirmation during troubleshooting. The board is built around a bank of seven configurable DIP switches paired with an adjacent settings chart printed directly on the module, letting a technician set lockout count, reset source, pulsed or continuous alarm output, test mode, freeze trip thresholds, and pump logic at the equipment instead of stocking multiple application-specific controls. Preinstalled nylon standoff clips allow drop-in mounting in the original control cabinet, making it a direct functional replacement across a wide range of split system and packaged HVAC equipment.