- 30-day returns
- Fast shipping
- Secure payments
- Over 300,000 products
age_group:
18+
category:
Facilities
country_of_origin:
USA
gender:
Unisex
manufacturer:
Specialty Optical Systems / SOS Cleanroom
mpn:
BD-600-PETG
sub_brand:
S-CURVE
type:
Facilities
Product Description
12"W x 12"H x 8"D — Cleanroom Dispenser with Round Opening (PETG)
This single-compartment dispenser is built to stage hair and beard-containment PPE at the point-of-use—gowning rooms, airlocks, and controlled entry points—so operators can take one item at a time without handling an open case or bulk bag on a bench.
Why dispensers matter in critical environments: organized, enclosed dispensing reduces unnecessary touch points, helps prevent “box-top” contamination, and supports clean, repeatable gowning behaviors. It also reduces waste by keeping supplies protected, visible, and easy to re-stock before teams start “just grabbing another box.”
Why dispensers matter in critical environments: organized, enclosed dispensing reduces unnecessary touch points, helps prevent “box-top” contamination, and supports clean, repeatable gowning behaviors. It also reduces waste by keeping supplies protected, visible, and easy to re-stock before teams start “just grabbing another box.”
Published configuration (BD-600-PETG)
- SKU: BD-600-PETG
- Overall size: 12" W x 12" H x 8" D
- Construction: 1/8" clean PETG (clear), selected for compatibility with IPA wipe-down programs
- Access: Large round front opening; top lid with full-length hinge to help protect contents between uses
- Mounting: Wall-mount or free-standing
- Edges: Flame-treated for smoothness (reduces snag points and makes wipe-down easier)
- Packaging: Poly-bagged; 1 dispenser per case
Material selection: PETG vs. Acrylic (why PETG is specified here)
Many controlled environments use IPA (isopropyl alcohol) for routine wipe-down. PETG is commonly chosen for dispenser bodies in IPA-heavy programs because it is designed for chemical wipe-down compatibility.
Acrylic is often more scratch-resistant and lower cost, but acrylic is typically best suited to areas where cleaning is performed with milder methods (e.g., soap and water) rather than frequent IPA exposure.
Always follow your site SOPs for approved chemistries and contact times.
Acrylic is often more scratch-resistant and lower cost, but acrylic is typically best suited to areas where cleaning is performed with milder methods (e.g., soap and water) rather than frequent IPA exposure.
Always follow your site SOPs for approved chemistries and contact times.
Best-fit contents (typical use)
This format is typically used for hair and beard-containment PPE (beard covers, bouffant caps, hair nets) because those items are light, compressible, and benefit from protected point-of-use staging.
Qualification note: PPE packs vary by manufacturer and fold. Before standardizing, confirm the packaged/folded dimensions and “draw” behavior under your gowning method.
Qualification note: PPE packs vary by manufacturer and fold. Before standardizing, confirm the packaged/folded dimensions and “draw” behavior under your gowning method.
Recommended consumables (with internal links)
-
Beard containment (dispenses very well in round-opening formats):
HBC Series Polypropylene Beard Cover (1000/Case)Use where facial hair control is required to reduce shedding risk at the operator interface and to support consistent entry compliance. -
Hair containment / bouffants (high-frequency gowning item):
Polypropylene Bouffant Caps (multiple sizes & colors)Great for staging at the gowning room entrance so operators are not opening bulk bags in the controlled area. -
Kimtech head/neck coverage (pair alongside this dispenser at the same gowning station):
Kimtech A5 Integrated Hood and Mask (family page)For programs that require a hood-and-mask solution, stage these adjacent to the beard/bouffant dispenser to keep the gowning sequence tight and repeatable. -
Ansell cleanroom gloves (to complete the entry “PPE set”):
Ansell BNAL BioClean Nerva Cleanroom Nitrile Gloves (ISO 4 / Class 10)Pairing a defined glove with head/beard PPE helps standardize operator interfaces and reduces the temptation to “make do” with non-qualified gloves. -
Texwipe wipers (stage nearby for wipe-down discipline and line clearance):
Texwipe TX629 VersaWipe 9" x 9" (cellulose/polyester)
Texwipe TX1045 TechniSat 6" x 8" Pre-Wetted 70% IPAKeeping qualified wipers close to gowning and entry points supports routine touch-surface wipe-down and prevents “borrowed wipes” from uncontrolled sources.
Practical use & maintenance guidance
- Keep the lid closed between pulls to reduce deposition of particles on staged PPE.
- One item type per dispenser: Avoid mixing (e.g., bouffants + beard covers) unless your SOP specifically allows it—mixing increases touch and mis-pulls.
- Restock outside the critical zone when possible. Introduce only the required quantity into the controlled area.
- Wipe-down: Use only approved chemistries and methods (no abrasives). PETG is commonly selected for IPA wipe-down compatibility, but your QA program should define chemistry, contact time, and frequency.
- Inspection: Periodically check hinge integrity, wall-mount hardware, and edge condition to prevent debris generation or drop risk.
Need help standardizing a gowning station?
SOSCleanroom can help you select the right dispensers, glove formats, and wiping materials for your ISO-classified or regulated program—and provide supporting manufacturer documentation for qualification planning.
Questions? Email Sales@SOSsupply.com or call (214) 340-8574.
© 2026 SOS Supply. All rights reserved.