- 30-day returns
- Fast shipping
- Secure payments
- Over 300,000 products
Texwipe TX7111B ClipperMop™ Replacement Foam Pads — 11" x 4" Pad Kit with Fasteners (Non-Sterile)
TX7111B is the replacement pad kit for the 11" ClipperMop™ system (TX7103). The pad is designed to help the ClipperMop head conform to uneven surfaces so your chosen cleanroom wiper maintains consistent contact during floor, wall, ceiling, hood, and equipment-exterior cleaning. Each kit includes foam pads plus fasteners so technicians can restore the system to “like-new” wipe-down efficiency without improvising attachments that can shed particles or fail mid-task.
For over 35 years, SOS and Texwipe have been close partners, and SOSCleanroom is the authorized Master Distributor of ITW Texwipe for the United States market. That relationship matters when you are standardizing critical cleaning tools: it supports continuity of supply, stable product lineage, and fast access to the manufacturer documentation your QA/QC team expects.
For over 35 years, SOS and Texwipe have been close partners, and SOSCleanroom is the authorized Master Distributor of ITW Texwipe for the United States market. That relationship matters when you are standardizing critical cleaning tools: it supports continuity of supply, stable product lineage, and fast access to the manufacturer documentation your QA/QC team expects.
Published configuration (TX7111B)
- Part number: TX7111B
- Pad size: 11" x 4" (27.9 cm x 10 cm)
- System compatibility: For use with TX7103 ClipperMop™ (12" x 12" wiper size platform)
- Configuration: Replacement foam pads and white fasteners
- Sterility: Non-sterile (as published)
- Packaging (case): 100 foam pads and 40 fasteners per case (10 bags of 10 foam pads and 4 fasteners)
- Cleanroom packaging: Double-bagged (bag-within-a-bag practice is described for the system accessories)
| What you replace | Why it matters in critical environments | Practical technician trigger |
|---|---|---|
| Foam pad (conformability layer) | Helps keep your selected wiper in uniform contact to reduce streaking, skip-lines, and “edge-only” wiping that can leave residues behind | Wiper contact feels inconsistent, pad compresses permanently, visible wear, or cleaning results drift even with the same chemistry and dwell time |
| White fasteners (included) | Maintains the designed attachment method so the pad stays seated and does not shift (pad shift can create smear patterns and redeposition) | Fasteners show damage, looseness, or repeated field rework that slows change-outs and invites handling errors |
Low-linting intent — and the reality check
ClipperMop accessories are designed to support low particle and low fiber release versus conventional mops, but no mopping system is truly non-shedding. Treat pad changes like a contamination-control step: change before performance drifts, and keep replacement parts protected until the point of use.
How TX7111B fits into the ClipperMop™ workflow
TX7111B is not a mop cover. It is the replacement pad layer that sits under the wiper on the ClipperMop head and helps the wiper conform to real-world surfaces (floor texture, epoxy seams, cove base transitions, and equipment legs). The ClipperMop system is designed to use standard cleanroom wipers as the contact layer, which can simplify qualification because you can leverage wipers you may already have validated for your process.
| Process step | What the pad contributes | Risk if the pad is worn |
|---|---|---|
| Load wiper(s) onto ClipperMop head | Provides a compliant backing so the wiper lays flat and follows the surface profile | Wrinkles, bridging, or “high spots” that smear, skip, or leave thin chemical films |
| Apply/remove solutions and disinfectants | Helps maintain uniform wipe pressure to improve contact-time consistency and residue removal | Streaking, uneven wetting, longer dry times, and redeposition during the “pullback” stroke |
| Change wipers frequently (protocol discipline) | Supports efficient change-outs without tearing wipers or causing the head to snag | Handling delays, overuse of a loaded wiper, and higher cross-contamination risk between zones |
Practical cleanroom use guidance (technicians and engineers)
- Change the pad before the room tells you: Do not wait for visible failure. When pad compliance drifts, technicians compensate by adding force, which can increase streaking, redeposition, and edge drag.
- Minimize handling time in the critical zone: Stage replacement pads and fasteners in a controlled staging area. Open bags only when needed; keep remaining pads protected to limit particle deposition.
- Keep the wiper as the contact layer: The designed approach is wiper-on-head with clips/attachments; do not improvise tapes or non-qualified attachments that can shed adhesive residue or fail under disinfectant exposure.
- Control the wetness variable: Over-wetting makes any system smear and can leave films; under-wetting increases friction and can abrade residues across the surface. Standardize load level per your SOP.
- Zone discipline: Treat mop tools like “zone assets.” Use defined lanes and clean-to-dirty progression; change wipers (and pads when required) rather than crossing back over cleaned areas with a loaded surface.
Compatibility and sterilization notes (as published)
- Wiper compatibility (system-level): ClipperMop™ is described to use standard 9" x 9" or 12" x 12" cleanroom wipers, including dry, pre-wetted, sterile, or non-sterile wipers (your wiper selection is where most compatibility decisions live).
- Sterilization options (system-level): Manufacturer documentation describes compatibility with sterilization by gamma irradiation, chemicals, vaporized hydrogen peroxide (VHP), or ethylene oxide (EO). Validate your site method and post-sterilization handling before standardizing.
- Cleanroom environment: Recent manufacturer TDS lists ISO Class 3–7 (Class 1–10,000) and EU Grade A–D; an earlier system datasheet describes compatibility with protocols for ISO Class 3–8. Use the latest TDS as the primary qualification reference for audits.
- Chemistry exposure: Not published as a pad-only chemical-compatibility specification. If you run aggressive oxidizers or specialty disinfectants, qualify pad integrity under your chemistry and contact-time conditions before rollout.
Common failure modes
- Streaking / uneven film removal: Often driven by a worn pad (loss of compliance), over-wetting, or inconsistent stroke pressure. Prevent with scheduled pad replacement and controlled solution loading.
- Pad shift / poor seating: Happens when fasteners are damaged, missing, or reworked repeatedly. Prevent by replacing fasteners as intended and performing a quick seating check before entering the controlled zone.
- Particle redeposition from overuse: When wipers are pushed past capacity, soils and residues can redeposit. Prevent with frequent wiper changes (the system is designed for that discipline).
- Residue carryover between zones: Caused by using the same loaded wiper/tool across “clean” and “dirty” areas. Prevent with zone segregation and defined lane progression.
Storage and handling best practices
- Keep pads in original cleanroom packaging until the point of use; avoid staging open bags in airflow.
- Store away from sharp tools and rough surfaces that can nick or compress pads and degrade conformability.
- If your SOP requires wipe-down of incoming materials, wipe the outer bag first and introduce the inner bag per your gowning/antechamber practice.
- Document pad replacement as part of your cleaning tool control plan (traceability reduces investigation time when cleaning performance is questioned).
Documentation
SOS-hosted Texwipe datasheet (DS-7102, Effective: December 2009): Click Here
Texwipe manufacturer page (TX7111B): Click Here
Texwipe manufacturer PDF (ClipperMop™ Series Technical Data Sheet, US-TDS-058 Rev. 11/21): Click Here
Last updated: January 9, 2026
If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574.
Check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try!
THIS IS NEW FOR 2026!
© 2026 SOS Supply. All rights reserved.
Age group18+
CategoryMops
Country of originUSA
GenderUnisex
ManufacturerSpecialty Optical Systems / SOS Cleanroom
MpnTX7111B CASE
Sub brandITW TEXWIPE
TypeMops