- 30-day returns
- Fast shipping
- Secure payments
- Over 300,000 products
age_group:
18+
category:
Mops
country_of_origin:
USA
gender:
Unisex
manufacturer:
Specialty Optical Systems / SOS Cleanroom
mpn:
TX7125
sub_brand:
ITW TEXWIPE
type:
Mops
Product Description
Texwipe TX7125 BetaMop® Replacement White Fiberglass Handle & Head Frame (Handle/Clamp Hardware)
TX7125 is the BetaMop® handle-and-clamp hardware used with the BetaMop II / BetaMop string-mop cleaning system for controlled-environment floor cleaning, solution application, and disinfectant removal. This configuration is intended to support low-contamination handling with a quick-opening clamp so technicians can change head refills efficiently without over-handling wet textiles.
For over 35 years, SOS and Texwipe have been close partners, and SOSCleanroom is the authorized Master Distributor of ITW Texwipe for the United States market. That relationship matters for mop programs in critical environments: it supports continuity of supply, consistent product lineage, and fast access to the manufacturer documentation your QA/QC team expects.
For over 35 years, SOS and Texwipe have been close partners, and SOSCleanroom is the authorized Master Distributor of ITW Texwipe for the United States market. That relationship matters for mop programs in critical environments: it supports continuity of supply, consistent product lineage, and fast access to the manufacturer documentation your QA/QC team expects.
Published configuration (TX7125)
- Part number: TX7125
- System compatibility: BetaMop II / BetaMop string-mop system (handle/clamp hardware used with BetaMop head refills)
- Handle material: White fiberglass handle
- Hardware included: Handle with clamp (quick-opening clamp); head frame is listed as included with the case unit
- Total handle length: 60" (1.5 m)
- Packaging: 1 handle kit/case (case unit: 1 white fiberglass handle and head frame)
- Autoclave: Autoclave safe (verify cycle conditions under your facility SOP before standardizing)
- Cleanroom environment: ISO Class 3–7; Class 1–10,000; EU Grade A–D
Low-contamination handling depends on the hardware — not just the mop head
Cleanroom mop programs fail most often at the interfaces: clamp wear, residue build-up around joints, and uncontrolled change-outs. Treat the handle and clamp like a contamination-controlled tool: keep it dedicated to the room grade, keep it clean between shifts, and inspect it before every head refill change.
Compatible BetaMop head refills (published)
The BetaMop handle/clamp is published as compatible with BetaMop string or strip head refills. The table below lists commonly paired BetaMop string refills referenced in the BetaMop Series TDS.
| Refill SKU | Material / construction (as published) | Use intent | Packaging (as published) |
|---|---|---|---|
| TX716R | Knitted 100% polyester string mop refill (tubular) | High sorptive capacity for routine floor cleaning and solution pickup | 6 heads/case |
| TX7070 | Knitted 100% microdenier polyester string mop refill | Increased lifting/capturing ability for small particles; streak-free cleaning | 6 heads/case |
| TX1722 | Revolve™ sustainable polyester string mop refill (non-sterile) | Sustainability-focused string mop option for cleanroom floor programs | 6 heads/case |
| STX1722 | Revolve™ sustainable polyester string mop refill (sterile) | Sterile string mop option for higher-grade areas where sterile is specified | 6 heads/case |
Practical cleanroom use guidance (technicians and engineers)
- Pre-use inspection: Verify clamp action (full open/close), confirm there are no cracks, loose fasteners, or rough edges that can abrade the mop head and elevate shedding risk.
- Controlled change-outs: Perform head changes at the boundary of the work area when possible, not over open product. Keep the clamp area dry when feasible to prevent residue build-up and slippage.
- Dedicated tool discipline: Assign handles by room/grade (and ideally by disinfectant family) to reduce chemical cross-residue and bioburden transfer between zones.
- Stroke control: Use consistent, overlapping strokes and avoid aggressive twisting. Over-torqueing the handle increases clamp stress and can cause premature loosening.
- Edge management: Keep the clamp and frame away from walls/fixtures when possible. Hard contact points create the fastest wear and can generate debris or nick the mop head.
Compatibility, disinfectant, and sterilization notes
- Disinfectants: The BetaMop system is published as compatible with most disinfectants. Prevent chemical carryover by using defined change control (one chemistry per bucket set) and rinsing/cleaning hardware per your SOP.
- Autoclave use: The handle/clamp hardware is published as autoclave safe. If you autoclave, qualify your specific cycle (temperature, dwell, drying) and verify clamp performance after repeated cycles before writing it into a validated cleaning program.
- Wring-bucket integration: BetaMop II is designed to be used with most wring-bucket systems; confirm wringer geometry and clamp clearance to avoid mechanical damage during wringing.
Common failure modes
| Failure mode | What it looks like in the field | Prevention / control |
|---|---|---|
| Head slippage at the clamp | Mop head migrates, rotates, or loosens during wet passes | Dry the clamp zone before securing; verify full clamp closure; replace worn hardware before it becomes a recurring deviation |
| Residue build-up around joints/clamp | Sticky feel, streaking, or visible film transfer onto floors after passes | Add a defined hardware-clean step to end-of-shift SOP; avoid soaking the clamp assembly in concentrated chemistry unless documented/validated |
| Abrasion / unintended shedding from impact points | Clamp/frame scuffs walls or thresholds; debris appears near edges | Technique training (keep hardware off hard edges); replace damaged frames; avoid dragging hardware across rough floor transitions |
| Cross-zone contamination | Unexpected residues/bioburden signals after area changes | Dedicated handles by room grade; clear labeling; controlled staging and transport; avoid storing wet hardware in shared carts |
Storage and handling best practices
- Keep the handle/hardware in its original packaging until introduced into the controlled area.
- Store dry, closed, and off the floor; use a clean rack or designated hook point to avoid clamp damage and residue collection.
- Do not stage wet hardware in enclosed containers unless your SOP specifies ventilation/dry-down to prevent odor and residue concentration.
- Document hardware replacement intervals (or inspection-based criteria) as part of the mop program so clamp wear does not become an untracked contamination risk.
Documentation
SOS-hosted BetaMop II datasheet (TX7106 / TX716R, Effective: February 2013): Click Here
Texwipe BetaMop® Handle & Head Frame product page (TX7125): Click Here
Texwipe BetaMop Series Technical Data Sheet (updated): Click Here
If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574.
Check out our AI ChatBot powered by SOSCleanroom data libraries - give it a try!
THIS IS NEW FOR 2026!
Last updated: January 9, 2026
© 2026 SOS Supply. All rights reserved.